Optimus 120-2113 Manuel d'utilisateur

High-Power In-Dash AM/FM Stereo Cassette w/Auto Reverse (120-2113) Feature Faxback Doc. # 62491 Your Optimus High

rubber grommet onto the mounting bolt. Otherwise, you can use the supplied bolt and washer to attach one end of the supplied metal

High-Power In-Dash AM/FM Stereo Cassette w/Auto Reverse (120-2113) Operation Faxback Doc. # 62493 The stereo's

Hold down POWER for about 3 seconds to change the display's color from amber to green (or vice versa). Adjusting The Controls When you listen

Playing The Radio 1. Press POWER to turn on the stereo. 2. Press BAND to select the AM or FM band. AM 1 or AM 2 appears on the display when

2. Tune to the station you want to store. 3. Hold down the desired memory location button until the frequency, ME, and band and memory group ap

2. To start automatic memory scan, briefly press AMS. The radio begins scanning the stored stations, and the current memory location number

To fast-forward or quickly rewind the current side, firmly hold down << or >>. The tape quickly winds. Play resumes when the tape reac

High-Power In-Dash AM/FM Stereo Cassette w/Auto Reverse (120-2113) Care and Maintenance Faxback Doc. # 62494 Your Optimus High

wound on the reels. This can cause playback sound quality to deteriorate. To restore the sound quality, fast-forward the tape from the beginning to

High-Power In-Dash AM/FM Stereo Cassette w/Auto Reverse (120-2113) Specifications Faxback Doc. # 62495 Radio:

Band Button - lets you select the AM or FM band with the push of a button. Seek Tuning - searche

Power Output (10% THD @ 1 kHz): ... 16 Watts RMS/Channel (With 2 Speakers) 4 Watts RMS/Channel (With 4 Speakers)

High-Power In-Dash AM/FM Stereo Cassette w/Auto Reverse (120-2113) Installation Faxback Doc. # 62492 Before You Begin

Before you mount the stereo, use a Phillips screwdriver to remove the screw, spacer, and rubber washer from the top of the stereo. This allows you

| \_ - | _ + (connector) | ___Rear Left Speaker___/

|||| ||||__Black-----------GROUND (-)---------------(To Chassis Ground) ||| |||___Red-------------POWER LEAD B+ -----------(To ACC) ||

Connecting Two Pairs of Speakers If you are using both front and rear speakers, follow these steps to connect the harness to the speakers.

If you are using only one pair of speakers, follow these steps to connect the harness to the speakers. (connector)

If the stereo does not work, immediately disconnect the cable from your vehicle battery's negative (-) terminal. Then recheck your connections.